Custom Bathroom Vanities

Drawn, Engineered, and Built in One Place

A vanity lives in the tightest, wettest room in the house, where the cabinetry has to meet stone, plumbing, and tile with no room to fudge. We work all of that out on paper first — sink cutouts to your slab, drawer banks around the trap, reveals to the wall — then carry the piece through engineering, fabrication, finishing, and installation without it leaving the building. What we draw is what we set, scribed to a wall that is never perfectly straight.

That single chain of authorship is why a Sunshine Alliance vanity still sits true years after the bath is finished. There is no fabricator handing off to an installer who never saw the drawings, and no second company to blame if a drawer binds or a top doesn’t sit flush — one shop owns it from the first drawing to the final adjustment.

Floating, Furniture-Style, and Stone-Topped

A vanity can float off the wall on a clean reveal, stand like a piece of furniture on legs, or anchor a master bath as a double run beneath a shared stone top. We build all of it — floating vanities with integrated LED underlighting, fluted and reeded fronts, curved and radiused cabinetry, powder-room jewel boxes, and full his-and-hers master configurations.

Whatever the brief, the engineering is identical: tight reveals, doors that align across the run, integrated sink cutouts cut to your stone, and a finish built to live in a wet room.

Finished in Our Own Spray Booth

Color is unlimited and the finish is entirely ours to control. From a dead-matte lacquer close to the wood, through every step of satin, to a polished high gloss — plus stain, glaze, and distressing — we mix and spray every vanity in our own Deerfield Beach booth. Nothing leaves to be finished elsewhere.

Because finishing is in-house, the color is matched to whatever anchors the bath — a slab, a tile, a fabric — and the finish is sealed to live in a wet room for years without yellowing or lifting. The result reads as one considered piece, not a stock cabinet refinished to fit.

Beyond the Vanity — We Build the Whole Bath

A bathroom is more than its vanity, so we build the rest of it too: linen towers, medicine and mirror cabinets, water-closet storage, makeup and dressing stations, and integrated hampers. We coordinate the vanity to your stone, your faucet placement, and your lighting, and engineer for the realities of a wet environment — sealed finishes, moisture-stable materials, and hardware chosen to last.

The result is a bathroom that feels resolved the moment you walk in, and stays that way for generations.

The Sunshine Alliance Standard

Every vanity we build is made on the same floor that, in 2025 alone, cut 8,186 sheets, assembled 10,200 cabinet boxes, and produced and installed 17,650 parts across 635 projects — with more than two decades of manufacturing behind it, from a Deerfield Beach factory that doubled in size for 2026. From a powder room to a full master suite, builders and designers across South Florida’s finest homes specify our cabinetry when the bath has to be right. Designed, engineered, built, and installed in-house. One team, one standard.