Drawn, Engineered, and Built in One Place

A kitchen has more moving parts than any room in the house — appliance clearances, plumbing runs, panel reveals, and the point where three trades have to meet on one wall. We resolve all of it on paper first, in our own drawings, then carry the job through engineering, fabrication, finishing, and installation without it ever leaving the building. What gets approved on the drawing is what gets installed, because the same shop drew it, cut it, and hung it.

That single chain of authorship is why a Sunshine Alliance kitchen still closes square years later. There is no fabricator handing off to an installer who never saw the drawings, and no second company to point at when a door drifts out of line — the team that built the kitchen is the team standing in it.

From a Galley to a Double-Island Showpiece

We build the full range: a compact galley with floor-to-ceiling storage, a transitional island kitchen with a marble waterfall, a handle-free modern kitchen in high gloss, or a double-island showpiece with a full appliance wall and a walk-in pantry. Tall cabinets, integrated appliance panels, hidden charging drawers, spice and tray dividers, and lit glass display are all drawn around the way you cook — not forced into a standard module.

Every cabinet is engineered to your ceiling height, your appliances, and your wall, so the finished kitchen uses every inch and looks like it was built for the room, because it was.

Finished in Our Own Spray Booth

Color is unlimited and the finish is entirely ours to control. From a dead-matte lacquer close to the wood, through every step of satin, to a polished high gloss — plus stain, glaze, and distressing — we mix and spray every kitchen in our own Deerfield Beach booth. Nothing leaves to be finished elsewhere.

Because finishing is in-house, the color is matched to whatever sets the room — a paint chip, the island stone, a sample door — and sprayed consistently across every cabinet, so the whole kitchen reads as one room rather than a set of separately finished parts. On wood, we grain-match all the parts so the figure runs continuously across doors and panels.

Beyond the Kitchen — The Whole Connected Space

A kitchen rarely stops at the kitchen, so we build the rest of it too: a matching butler’s pantry, a connected bar or wine wall, banquette seating, and the surrounding millwork and built-ins that tie the space together. We coordinate to your stone, your appliances, and your lighting plan so the whole open-plan space reads as one continuous, considered design.

For the bar or wine wall beside it, see our Bars & Wine Walls; for the surrounding paneling and built-ins, see our Architectural Millwork and Custom Built-Ins — one team builds them all to match.

The Sunshine Alliance Standard

The kitchens we build come off the same floor that, in 2025 alone, cut 8,186 sheets, assembled 10,200 cabinet boxes, and produced and installed 17,650 parts across 635 projects — with more than two decades of manufacturing behind every one, out of a Deerfield Beach factory that doubled in size for 2026. When a kitchen has to be right the first time, builders, designers, and homeowners across South Florida’s finest homes hand it to us. Designed, engineered, built, and installed in-house. One team, one standard.